A pool deck is where most pool time is actually spent: walking, lounging, dining and keeping an eye on children. In Austin, it also takes the worst of the weather. Summer sun can make some decks too hot to stand on, expansive clay soil can crack or shift them, and an occasional hard freeze finds every weakness.
If you are planning a new deck, replacing a cracked one or remodeling your pool, the material you choose matters more than most people expect. This guide compares the common pool deck materials and explains how each handles Central Texas conditions.
What a good pool deck needs to do
- Stay comfortable underfoot, even in July and August
- Provide traction when wet
- Drain water away from the pool and house
- Move with the soil without cracking or tilting
- Hold up to sun, chemicals and freezes
- Look good and fit your budget
No single material is best at everything. The right choice depends on how you use the pool, your budget and how much maintenance you will accept.
Poured concrete
Pros: It is the most common deck material, cost-effective and durable. It can be finished with a broom texture for traction, or stamped and colored to look like stone or brick.
Cons: Plain concrete can get hot, especially darker colors. In clay soil, a slab can crack or shift, so control joints, subbase preparation and reinforcement matter. Surface finishes can wear, fade or stain.
Austin notes: Light colors stay cooler. Good base preparation and properly placed joints are essential. Learn why in our guide to cracked coping and deck separation in Austin’s clay soil.
Concrete with cool-deck coatings or overlays
Pros: A textured cool-deck coating or overlay can improve traction and appearance and can stay cooler underfoot than bare concrete. It can also refresh a worn deck without a full replacement.
Cons: A coating does not fix a cracked or moving slab. Cracks can reappear through it, and the coating wears and needs periodic maintenance or recoating.
Austin notes: Choose products rated for pool decks and for high heat, and make sure cracks and joints are addressed first.
Pavers
Pros: Concrete, clay or stone pavers come in many colors and patterns. Because the deck is made of individual units, it can flex with minor soil movement, and individual pavers can be replaced if one is damaged.
Cons: Pavers can settle, shift or tilt over time if the base is not properly built. Joints can grow weeds, and sand needs refreshing. Cost is usually higher than plain concrete.
Austin notes: Base preparation is critical in clay soil. Lighter colors stay cooler.
Travertine
Pros: Travertine is a natural stone that stays relatively cool underfoot, even in strong sun. It has a natural, upscale look and a textured surface for traction when finished appropriately.
Cons: It costs more than concrete, can stain or wear if not maintained, and needs sealing in many installations. Like any natural stone, it needs a stable base, and installation details matter.
Austin notes: It is a popular choice here for exactly the reason that it stays cooler. Ask about finishes and sealing options.
Natural flagstone and other stone
Pros: Natural flagstone and other stones give a unique, organic look and can work well with landscaping.
Cons: Surfaces may be uneven, some stones get hot or become slippery, and cost and installation labor can be high. Color and heat behavior vary widely by stone.
Austin notes: Check how the specific stone behaves in sun, and ask for samples to test in the heat.
Brick
Pros: Brick has a classic look and can be attractive with traditional homes.
Cons: It can absorb heat, and the joints require maintenance. Settlement and tilting can occur without a good base.
Wood and composite decking
Pros: Elevated decks or raised areas near a pool can use wood or composite materials, which are comfortable to walk on and can look warm and inviting.
Cons: Wood requires upkeep and can splinter, and composite can get hot depending on color. Both need care around constant water and sun.
Austin notes: These are more common in raised or accent areas than as the main deck at ground level.
Comparing materials: what matters most
Heat: Light-colored travertine and cool-deck finishes generally stay cooler than dark concrete or dark stone. Always test samples in direct sun.
Traction: Broom-finished concrete, textured overlays, travertine with a non-slip finish and pavers can all provide traction. Smooth, sealed or polished surfaces can become slippery when wet.
Movement: Pavers handle small movement better than a rigid slab, but all decks need a good base. In expansive clay soil, preparation and drainage matter more than the surface material.
Cost: Concrete is generally the most economical. Pavers, travertine and natural stone cost more. Overlays fall in between, depending on the system.
Maintenance: Concrete needs sealing and repair of cracks. Stone needs sealing and cleaning. Pavers need sand and weed management. Cool-deck coatings need periodic recoating.
Drainage, joints and the coping connection
A good deck slopes away from the pool and the house so water does not collect or run toward the structure. The deck also needs a flexible joint where it meets the coping, so the two can move independently. When that joint fails, water gets behind the pool shell and can lead to cracks and leaks. Maintaining that joint is one of the simplest ways to protect your pool.
Safety around the pool
Choose finishes with good traction, keep drainage working and consider handrails at steps and entries. See our post on why pool hand rails improve safety for every age group and our pool hand rails service.
Planning a deck as part of a remodel
Deck work often goes together with coping, tile, resurfacing and equipment upgrades, because doing them at the same time can save on access, labor and disruption. If you are planning a larger project, read how much a pool remodel costs in Austin, how long a pool renovation takes and the signs your pool needs remodeling.
Questions to ask a pool deck contractor
- How will you prepare the base in our clay soil?
- Where will the control joints and expansion joints go?
- How will the deck drain?
- Which material do you recommend for heat and traction, and why?
- Can I see samples or past projects?
- What sealing and maintenance does it need?
- What warranty do you offer?
FAQ
What is the coolest pool deck material?
Light-colored travertine and some cool-deck coatings tend to stay cooler than dark concrete or dark stone. Test a sample in sun.
Can I resurface my existing concrete pool deck?
Often, if the slab is stable. Cracks and movement should be repaired first.
How long does a pool deck last?
It depends on the material, the base and the soil. A well-built deck can last for many years.
Is a paver deck better than concrete in clay soil?
Pavers handle small movement better, but only if the base is properly built. Concrete can work well with correct joints and preparation.
Should I seal my pool deck?
Many materials benefit from sealing. Ask your installer what suits yours.
Plan your pool deck with McTarga Pools
McTarga Pools provides decking, deck repair, coping and tile work for pools across Austin. See our pool remodeling services, call (512) 998-1188 or contact us online.