Austin has hard water, strong sun and warm temperatures, and all three are tough on pool surfaces. Over the years, plaster can pick up stains, rough patches and a chalky layer of mineral scale. An acid wash is one of the oldest ways to restore a pool surface. It is also one of the most misunderstood. Done at the right time, it can brighten a tired pool. Done at the wrong time, it can damage the surface and shorten its life.
This guide explains what a pool acid wash is, what it can and cannot fix, the risks and the alternatives.
What is a pool acid wash?
A pool acid wash is a cleaning process in which a diluted acid solution is applied to the plaster surface of a drained pool. The acid etches away a very thin layer of plaster, taking surface stains, mineral buildup and discoloration with it. After the surface is rinsed and the acid is neutralized, the pool is refilled and rebalanced.
It is a surface treatment. It does not repair cracks, leaks, delamination or structural problems.
Why Austin pools develop scale and stains
- Hard water. Central Texas water is rich in minerals, and calcium deposits build up where water evaporates, especially at the waterline.
- Heat and evaporation. Hot summers speed evaporation, which leaves minerals behind.
- Chemistry swings. Water that is out of balance can leave scale or etch the surface.
- Leaves, debris and metals. Organic matter and metals in the water can stain plaster.
- Age. Plaster becomes rougher and more porous over time, so it holds stains more easily.
For related surface wear, read our guide on pool resurfacing in Austin.
What an acid wash can help with
- Light to moderate organic stains, such as leaf and algae stains
- Mineral and calcium scale on plaster
- Dull, discolored or blotchy plaster that is otherwise sound
- Preparing a surface for a repair or coating, when recommended by the installer
What an acid wash cannot fix
- Cracks, leaks and structural damage. If you suspect a leak, you need leak detection, not an acid wash.
- Deep or metal stains that are embedded in the plaster, which may need other treatments
- Delaminated or hollow plaster, which needs repair or resurfacing
- Heavily worn plaster, where there is little surface left to remove
- Fiberglass, vinyl and painted surfaces. Acid washing is not appropriate for these, and it can damage them.
Some specialty finishes can also be damaged by acid. Always ask your pool professional which finish you have and whether acid washing is safe for it.
Risks you should know about
It removes plaster. Each acid wash takes off a thin layer of the surface. Repeated washing thins the plaster, makes it rougher and can shorten its life. It is not a routine maintenance step.
It can leave a rough or uneven surface if done incorrectly or with too strong a solution.
It requires draining the pool. In Austin’s expansive clay soils, an empty pool can be at risk. Ground and groundwater pressure can push on an empty pool shell and, in extreme cases, cause damage. Do not drain a pool without professional guidance on timing and conditions. Read about how Austin’s clay soil affects your pool.
Fumes and chemical handling. Acid is hazardous to people, plants and surrounding surfaces. Handling and disposal rules apply, and the runoff should not go where it is not allowed. Local requirements for draining and disposal vary, so confirm them before starting.
It can damage surrounding materials. Splash and runoff can affect coping, decking, tile and landscaping.
Surface exposure during an empty pool. Hot summer sun can stress an empty plaster surface. Timing matters.
Because of these risks, an acid wash is generally best left to experienced pool professionals.
Alternatives to an acid wash
Depending on the problem, other options may be safer or more effective:
- Chemical stain treatments for specific stains, often applied without draining the pool
- Brushing and pumice or other mild abrasives for scale and light stains
- Tile cleaning to remove calcium at the waterline. Scale on tile is often treated separately from plaster.
- Balancing your water chemistry to stop scale from returning
- Pressure washing the deck and coping, which is a separate service from acid washing
- Plaster repair for localized damage. See how pool plaster repair keeps your pool looking new.
- Resurfacing when plaster is worn, rough or failing
If the surface is more than lightly stained, resurfacing is often the better long-term choice than repeated acid washing.
What the process looks like
- Inspection. A professional checks the finish, the plaster condition, the type of stain, the water table and the weather before deciding on a method.
- Draining. The pool is drained in a controlled way, with attention to hydrostatic pressure.
- Preparation. Equipment, lights, tile and surrounding surfaces are protected, and loose scale is brushed.
- Acid application. A diluted solution is applied in sections and brushed or rinsed before it etches too deeply.
- Neutralization and rinse. The acid is neutralized and washed away thoroughly.
- Refill and rebalance. The pool is refilled and the chemistry is balanced. New plaster surfaces need careful chemistry management.
- Follow-up. Check the surface and water in the days afterward.
How much does a pool acid wash cost?
Pricing varies with the size of the pool, the condition of the plaster, the amount of staining and scale, the access to the pool, and the cost of draining and refilling. We provide an estimate after seeing the pool. Compare any quote with the cost of other options, including resurfacing. See our guide on what a pool remodel costs in Austin.
How to keep scale and stains from coming back
- Test and balance water regularly, especially calcium hardness, pH and alkalinity
- Brush the waterline and clean tile on a schedule
- Remove leaves and debris promptly
- Control metals with proper chemistry and filters
- Keep up with maintenance. See our tips for swimming pool maintenance in Austin.
- Schedule periodic inspections to catch problems early
FAQ
How often should I acid wash my pool?
It is not a routine task. Many pools never need it, and repeated washing thins plaster. Ask a professional for advice on your pool.
Can I acid wash my pool myself?
It is not recommended. The chemical hazards, the draining risks and the potential for surface damage make professional service safer.
Will an acid wash fix a pool leak?
No. It only treats the surface. If your pool is losing water, call for leak detection.
Does an acid wash work on a pebble finish?
Often not, or only with special care. Ask about your specific finish before any acid is used.
Is a pressure wash the same as an acid wash?
No. Pressure washing uses water pressure on decks and coping, and acid washing is a chemical treatment for plaster.
Talk to a pool surface specialist in Austin
McTarga Pools provides acid and pressure washing, tile cleaning, plaster repair and resurfacing for Austin pools. Call (512) 998-1188 or request a quote. See our pool remodeling services.